Product Overview
One specification, three sizes. The 20-, 24- and 28-inch cases share the same lightweight nylon, the same embedded TSA combination lock, the same four-wheel spinner base and the same interior layout. For a wholesale travel luggage order that consistency matters: one component standard covers the whole size run instead of three, so a buyer stocks a family rather than a collection of lookalikes. As travel luggage manufacturers, we match the three sizes to different trip durations, which helps corporate travel programmes standardize inventory. Buyers can specify the set for bulk purchase with customization features, and it fits into travel management systems that emphasize cost control and regulatory adherence.
Set Composition & Interior
All three carry the same exterior trim, the same lock and the same wheel assembly, so they read as one family on a showroom floor and in a corporate handout. Inside, the layout repeats piece for piece, which matters more than it sounds — a traveller who has packed the cabin case once already knows where everything lives in the 28-inch. The 20-inch adds a built-in laptop compartment that holds a notebook flat against the back wall where it takes the fewest knocks, and separate interior pockets keep documents, cables and clothing apart so a security check does not turn into a full unpack on a tray. If you need custom business travel luggage in one size to top up a replacement pool rather than take full sets, raise it with your sales contact when the brief goes in.
360° Spinner Wheel System
- Four independent wheel modules. Each case runs four separate double-wheel assemblies, one at every corner, on an injection-moulded wheel frame with a high-elasticity silent PU tyre. Nothing shares a single axle, so a knock at one corner does not take out the other three.
- Precision ball bearings. A bearing inside each housing allows full 360° rotation with no dead angle: the case tracks forward, reverses, slides sideways and turns on the spot without jamming. That is what makes luggage sets with spinner wheels genuinely one-handed in a queue.
- Reinforced seats. The wheel seats are thickened nylon injection mouldings, and the base of the case is stitched double-layer where the assembly meets the fabric, so the housing resists cracking and wheel loss through airport handling and bumpy ground.
- Quiet on the surfaces you actually cross. The PU compound runs quietly over terminal tile, hotel corridor carpet and city pavement, and it shrugs off grit and gravel, so the wheels are less likely to jam or split on a long transfer.
- Weight sits on the wheels. A fully packed case stands on its own base and rolls on a light push, taking the load off wrists and shoulders — the difference between arriving fresh and arriving with a sore arm.
- Where it pays off. Narrow gate corridors, check-in snakes, subway escalators and the step between terminal and shuttle bus, where dragging a two-wheel case at an angle is the slow option.
- These wheels roll through narrow airport passages, check-in counters, and subway escalators without dragging. The PU silent wheels cut the harsh friction noise heard in hotel corridors and airport terminals, and the load is distributed evenly so a fully packed case stays easy to push and pull, reducing strain on wrists and shoulders for frequent business travelers. The tread is wear-resistant against ground sand and gravel, so the wheels are less likely to jam or burst during long-term transport, loading and unloading, and on rough roads.
- The locks are certified by the U.S. TSA and have a special master key that lets customs open and inspect a case without damaging it, so an uncertified lock does not have to be forced or cut during security checks. Travelers set their own combination for daily use, which keeps personal privacy while meeting international security requirements.
- As travel luggage manufacturers, we offer color options and sizing flexibility that let procurement specialists tailor inventories to specific client requirements or brand identities.
TSA Lock & Customs Inspection
For business travel luggage manufacturers, the lock is the component that decides whether a case sails through screening or gets cut open. Every case here carries an embedded three-digit combination lock with the red Travel Sentry diamond on the body, and the keyhole at the side is the customs channel: security staff hold the matching master key, open the case, inspect it and relock it without touching the zipper.
No key comes with the case, and you do not need one. The combination belongs to the traveller; the master key belongs to the screening authority. Lock the case normally before you check it in, and if it is selected for inspection it is opened and closed again without damage to the lock or the fabric.
If a code is ever lost, do not force the case. Work through the reset sequence below, or contact our after-sales team for assistance — the lock body is designed to be recovered, not prised apart.
Combination Setup Steps
- Open the case on the factory code: turn the three dials until 000 sits on the index line, press the side release buckle inward and pull the zipper sliders out of the lock slots.
- Close and lock it: seat both sliders fully into the slots, then spin the dials away from 000 and the lock engages.
- Start a new code with the lock open: press and hold the RESET hole on the side of the lock body with a pen tip or a thin rigid pin, and keep it pressed.
- Set the three dials to a code you will remember, avoiding obvious sequences such as 123 or 000.
- Release the pin, scramble the dials, then test — only the new code should open the case.
- Write the code down somewhere separate from the case so a forgotten number never becomes a forced entry.
Build & Zipper Security
- Nylon body. A lightweight nylon weave carries the load without adding bulk weight, and it flexes under impact rather than passing the hit straight through to the contents.
- Stitching where it counts. Seams are reinforced and edged along the base, the handle anchors and the zip line — the three places softside travel luggage usually fails first.
- Zipper security. Both sliders park inside the lock body once the case is closed, so the opening cannot be peeled back without the combination or a customs key.
- Trolley and handles. A multi-section aluminium alloy pull rod adjusts to different user heights and retracts flush into the case, while thickened top and side handles give a real grip when lifting the case onto a rack, a bus shelf or a belt.
- Honest about limits. Softside construction absorbs knocks and compression, but it is not a crush-proof shell: pack fragile items in the middle padded by clothing, and never force the zip closed on an over-filled case.
Size & Trip Planning
- 20 inch — carry-on: yes. Listed for a 1-3 day itinerary for 1 person, suitable for short-term business trips or travel. - 24 inch — carry-on: no, it must be checked in. Listed for a 1-6 day itinerary for 1 person, suitable for short-term business trips or travel. A week of clothing plus site kit fits, and the case stays light enough to lift into a taxi boot one-handed. - 28 inch — carry-on: no, it must be checked in. Listed for a 7-10 day itinerary for 2 people, short-term overseas travel or a long-term business trip. Two people's clothing, shoes and travel extras go into one case, which keeps a couple or a two-person project team to a single checked item. - Allow for what you actually pack. Clothing thickness and packing style change how much fits, and cabin and checked-bag allowances differ between carriers. Use these itineraries as planning guidance and confirm the current limit with the airline a business travel luggage programme flies most.
Specifications
| Property | Value |
|---|
| Body material | Lightweight nylon |
| Set contents | One 20-inch, one 24-inch and one 28-inch case |
| Wheels | Four independent 360° double-wheel spinner assemblies per case |
| Wheel build | Silent PU tyre on an injection-moulded frame with a precision ball bearing |
| Trolley | Aluminium alloy, multi-section telescopic pull rod |
| Handles | Thickened top and side carry handles |
| Lock | Embedded 3-digit TSA combination lock with Travel Sentry keyhole |
| Zippers | #8/#10 high-tensile zippers with lockable sliders |
| Lining | 210D polyester with mesh storage pockets |
| Laptop compartment | Built into the 20-inch case only |
Wholesale & Customization
- OEM and ODM programmes. Colour matching, logo printing or a logo plate, lining and zipper puller changes, packaging and size configuration can all be built into an order. Send the artwork, the target market and the size mix you plan to carry, and the specification is confirmed against that brief before anything reaches the line.
- Private label, kept restrained. Most custom business travel luggage briefs are about control rather than redesign: a logo on the front panel, a matched lining, a carton that carries the brand — all on the proven 20/24/28 construction.
- Four base colourways. Black, red, brown and purple are standard. Splitting one order across them lets a distributor separate sales tiers, departments or regions without changing the case underneath.
- Direct from the source. We are travel luggage manufacturers running our own workshops, so a specification change reaches the production team instead of stopping at a middle layer.
- Merchandised as a set, sold as sizes. Luggage sets with spinner wheels give a distributor a hero display and a size ladder at the same time — because all three share their construction, a buyer who starts with one size can be moved up or down later without a change of specification.
- Where the set sells. Chain luggage stores, cross-border e-commerce ranges, hotel and travel-agency gift sets, rental fleets that want one hard-wearing uniform case, and airline or ground-handling crew programmes.
- Fleet replacement logic. For shared or high-frequency use keep the model and the colour consistent so a replacement matches the cases already in service; in rental and crew use the 24-inch and 28-inch take the heaviest wear.
- Corporate travel rarely comes in one length. A policy built on this range is easy to write and easy to explain: 20-inch for a 1-3 day trip, 24-inch up to around six days, 28-inch when two people travel together for a week or more. As business travel luggage manufacturers we keep all three sizes on the same specification, so briefing a new starter, replacing a damaged case or moving someone between departments never means learning a new product. Comparing travel luggage manufacturers usually comes down to the same three questions: will the wheels survive a year of airport handling, will the lock pass security without an argument, and will the next order match the last one. One specification answers all three, and the nylon body keeps the empty weight off the traveller's shoulders on every trip. Beyond policy, the details do the work. The 20-inch carries a laptop compartment, so field staff can work from the case between site visits. The accepted lock keeps international itineraries moving. And because every piece takes the same wheel assembly and the same lock, a company can hold a small pool of replacement cases instead of a shelf of mixed models. The 20-inch carry-on suits one-person trips of one to three days, including short business trips, same-day return fieldwork, weekend city breaks, and short-haul international flights where you prefer not to check a bag. It also works for daily fieldwork and exhibition documents, with a built-in laptop compartment for working on the move. The 24-inch size is checked baggage for one traveler on trips of one to six days, such as domestic long-distance tourism, cross-provincial business work of around five days, and short-distance study tours.
Ordering & Delivery
- Send the brief. Tell us the sizes and the colour mix you want, the market you sell into, and whether the order is stock specification or private label.
- Terms are confirmed per order. Minimum order quantity, unit price, lead time and payment terms depend on the model, the colour mix and the level of customization. Your sales contact confirms all four against the brief, and as business travel luggage manufacturers we schedule production only once those terms are agreed.
- Confirm the customization. Colour, logo, lining, packaging and carton marks are agreed on a pre-production sample so the bulk order has something concrete to match.
- Packing. Three routes are available — basic packing, custom packing, and matched accessory sets. As standard, each case is protected in its own PE bag and three cases go into one export carton, which suits bulk wholesale travel luggage and corporate group purchasing. Carton marks, labels and the packing list are checked before dispatch.
- Shipping. Port, shipping terms and the document set are agreed with your sales contact at order confirmation, so freight can be costed before the goods leave.
Quality Control & Inspection
Every CHUBONT order passes five checkpoints inside our own workshops: incoming materials, pre-production samples, in-production patrols, finished-goods review, and a final pre-shipment check against the order. Batch records are kept, so buyers can see what was checked and when. You are welcome to send your own QC team, or appoint an independent inspector such as SGS or BV, to verify goods before they leave, and we support factory audits and on-site monitoring while production runs. Shipping marks, packing lists and carton labelling are confirmed against your instructions before loading.
FAQ
What materials are used in the CHUBONT LB-101110 spinner luggage set?
The body is a lightweight nylon weave, lined with 210D polyester that includes mesh storage pockets. The pull rod is aluminium alloy and the wheels are silent PU tyres on injection-moulded frames. Nylon was chosen because it keeps the empty case light and flexes under handling instead of passing the knock on to the contents — exactly what you want from travel luggage that is checked in and out several times a month.
Can I order custom business travel luggage with specific colours or branding?
Yes. OEM and ODM work covers colour matching across the four standard colourways or your own shade, logo printing or a logo plate, lining and zipper puller changes, packaging and size configuration. Most programmes start from the existing 20/24/28 construction and change what the buyer's market sees: the colour, the front panel, the lining and the carton. Send the artwork and the size mix you plan to carry and we will confirm what is practical for your order.
How do the 360° spinner wheels help in busy travel environments?
Luggage sets with spinner wheels change how you move through a terminal. You push the case upright beside you instead of dragging it tilted behind, so you can turn on the spot, move sideways out of a queue and roll at walking pace with the weight on four wheels rather than on your wrist. With four independent assemblies, one wheel hitting a kerb or a door sill does not stop the other three from tracking.
Are the TSA locks compliant with international travel standards?
The lock itself is TSA-accepted: it carries the Travel Sentry diamond and a keyhole that a customs master key opens, so screening staff can inspect and relock rather than cut. That acceptance applies to the lock mechanism rather than to the luggage brand, and it is the reason a checked case can stay sealed and intact through an inspection. Different markets apply their own screening rules, so confirm the requirement for a specific destination before committing a programme to it.
Will the 20-inch case fit my airline's cabin allowance?
It is built as a cabin case and is listed as carry-on, and it is the model field staff usually take for one to three days. Cabin limits still vary between carriers and aircraft, and a tightly packed case bulges at the seams, so check the packed case against the specific airline's published limit before a trip where the difference matters. If the allowance is tight, the 24-inch travels as checked baggage and keeps business travel luggage programmes covered for longer itineraries.